The US Aviation and Obstacle database is available for download here:
https://dynonavionics.com/us-aviation-obstacle-data.php
Updates should be performed with the system connected to an external (aircraft or bench) power source. They should not be done using the optional backup battery exclusively.
- On your PC: Download the file on this page. Save it to your computer, and then copy them to the USB memory stick. Files must be in the "root" of the USB stick. In other words, they can not be in a folder or directory.
- In the Airplane: Move the memory stick to any USB ports on one of your SkyView Displays.
-
Setup Menu: All update procedures are done in SkyView's Setup Menu. To enter the Setup Menu, hold down buttons 7 and 8 (the right two buttons) for a few seconds.
System Software INSTALL: Navigate to SETUP > SYSTEM SOFTWARE >LOAD FILES.... - Exit the setup menu.
- Repeat on each display. Exception: If your displays are configured to synchronize databases automatically, you will see a synchronization annunciation on other displays immediately after updating your first display’s database.
- When finished loading all files, power reboot the system by powering down all displays and restarting